Accept Paypal and Quick Shipping with tracking number

24 Channels DMX 512 Decoder LED RGB controller 3CH 8 Way

Be the first to review this product

Availability: In stock

£78.11
  • Buy 24 for £75.76 each and save 4%
  • Buy 100 for £73.42 each and save 7%
  • OR

    Quick Overview

    24 Channels DMX 512 Decoder LED RGB controller 3CH 8 Way is durable and popular for LED Lighting decoration, For big order or customized items of LED Strip, LED Controller, LED Power Supply and Other LED items, Pls feel free to contact service@ledlightingsave.com

    ledlightingsave.com offer high quality products and excellent service, so a lot of customers become our loyal customers after they first buy. Quick Shipping with Tracking, Easy and Safe Payment via PayPal.

     

    24 Channels DMX 512 Decoder LED RGB controller 3CH 8 Way

    Double click on above image to view full picture

    Zoom Out
    Zoom In

    More Views

    Details

    This decoder adopts the advanced micro-computer technology and converted the DMX512 digital signal widely used in international to the analog control signal. 1~24 channels output for option and each channel able to achieve 256 gradations of controlling, and also it can be used as the connector of PC digital light controller and analog light modulator. It is mainly used for the controlling of buildings & lights applied LED.

    working temperature: 0~70 celsius

    decode channel: 24 channels

    supply voltage: 12~24V DC

    external dimension: L340*W142*H57 mm

    net weight: 1.5KG

    gross weight: 1.6KG

    power consumption: <0.25A (12V), 0.3A (24V)

    signal input: DMX-512 standard digital signal

    signal output: 0~24V, Max 2A/CH

    power output: 12V: <576W, 24V: <1152W

    interface_specification

    1. DMX signal input interfac RJ45

    2. DMX signal output interface RJ45

    3. Address setting interface

    4. Drive output interface

    5. Power input interface

    6. XLR 3 input male-end

    7. XLR 3 output female-end

    DMX signal interface

    DMX_signal_interface.jgp 

    Address code setting on/off

    Please see the operatin instrucion next page.

    Power input interface

    DC 12~24V input, supplied power with the decoder and the lamps it takes.

    Drive output interface

    Common in anode-V+ and with 8 pieces of V+ interface & 24 pieces of R, G, B output interface. Not only does it apply to the various of LED module in full-color & mono color , but also it can self-trimming the output current based on the load of LED module.

    Remark

    Connect the anode and RGB wire of common anode RGB module to the output interface of decoder directly. Connect the anode wire of single-color module to V+ on decoder, and connect the cathode wire to one of RGB pin according to the LED's color, connect several colors single-color module to one decoder, please connect their anode wires to V+ pin on decoder.

    Direction for use

    1. Connecting of DMX-512 signal cable

    DMX signal cable used the CAT-5 cable, and DMX signal tells positive (+) from negative (-). While welding the DMX signal cable plug, there must pay much attention to know positive (+) from negative (-), and then connect the DMX512 signal cable with the corresponding input interface of DMX512 decoder correctly.

    2. DMX-512 addrss code set

    DIP switch of DMX512 decoder is with the function of writting the binary system and reading the DMX512 address code. DMX512 decoder is a decoder with 24 channels, when it is on line job, the second DMX512 decoder should be set the address code as the 25th channel. The 10th bit is TERM and will be the terminal while it is off (only used for the signals circuit setting). The bits from 1 to 9 of DIP switch are as the key of writing DMX address code, 1 is LSB and 9 is MSB, total 512 address codes. The initial address code is the DMX signal received by the No. 1 channels of decoder, calculational formula" [sum of 1~9 bits of DIP switch] = bit of the DIP switch down "0"), so the value of this bit is 0.

    Note: the 10th bit is the terminal.

    Value of each DIP:

    value_of_DIP 

    Example 1: set to 38

    Set the 6th, 3 rd, 1st bit of the DIP switch to "1", others set to "0", then the sum of 1~9 is 32+4+2, is the start address 38.

    That is: [32+4+2] = 38

    set_to_38 

    Example 2: set to 226

    Set the 8th, 7th, 6th, 1st bit to "1", others set to "0", the the sum of the 1~9 is 128+64+32+2, is the start address 226.

    That is: [128+64+32+2] = 226

    set_to_226

    3. Points for attention in instaling and using

    principle in installing & using

    1. the input voltage should be limited in rated rage

    2. do not use it by over load

    3. installed in suited environment

    A. the driver can not be setting in high temperature or wet conditions

     

    B. we recommend three ways to take away the heat as follows

     

    (1) bared in moving air

    (2) put in a big enough space for taking away the heat

    (3) fixed on big metalline board and make sure they are contacted well

    4. the reliable length of the line are 200 meters, please try to put the controller close to the decoder so as to avoid the signal become weak in using with the controller

    5. recommend to use the STP with the characteristic impedance of 120 ohm

    6. it is better to use one bus for the signal line, and join up with the in/out splice of the decoder

    7. make sure to fix the signal line to the splice of decoder

    8. please try to keep the decoder close to the light, if the light is over 5 meters, it is better to re-connect the light and decoder

    9. if there are several lights connected in series, please make sure the splice is firm and impervious joint

    10. signal line should be far away with the 110/220V AC cable

    installing_using.jgp 

    24_channels_DMX_decoder_controller

    24_channels_DMX_LED_decoder

    24_channels_DMX_decoder

    24_channels_DMX_controller_decoder

     Package Included:
    1 piece of 24 Channels DMX 512 Decoder LED RGB controller 3CH 8 Way

    CE and RoHS approved

    Processing Shipping & Tracking

    Mostly the parcel will be shipped within around 1 to 3 business days after payment is received. If you need the items urgently, Pls do contact us for the delivery date right after or before you placed orders. service@ledlightingsave.com

    Our website is very easy to use, the shipping fee base on the weight of the products. You would easily choose the Shipping Method (UPS/DHL/Fedex/Economic shipping) when you check out, We will always offer the Online Tracking Number to you via Email.

    All the products will be packed well for every order, to make sure you will quickly receive all the products at great condition. We weekly supply hundreds of parcels to UK, USA, France, Germany, Italy, Switzerland, Spain, Canada, Sweden and other Europe countries, and we show you the following photos which we took right before we pack the parcels.

    orders_to_ledlightingsave

    orders_to_ledlightingsave_website

    Ordering & Payment

    We supply our clients with high quality products, quick shipping and professional service, Here are some photos of the Paypal Payments to our account, as you would see, all of the orders has tracking number, and none of them has any problems to be asked for refund or something else, it is a good reference of our products and service: (We covered the name and email to protect the privacy of our clients).

    paypal_payment_to_ledlightingsave_for_led_light

    paypal_payment_to_ledlightingsave_for_led_light_controllers

    We offer high quality products and service, so a lot of customers become our loyal customers after they bought from our company, here are some cases for your reference:

    paypal_payment_to_ledlightingsave_for_led_light_controllers_wholesale_price

    paypal_payment_to_ledlightingsave_for_led_light_controllers_wholesale_price_discount

    We have access to additional products which are not yet listed on this website. If there is something else you need, please email us we will check on its availability and get back to you very soon.

    Pls Contact service@ledlightingsave.com   We will reply quickly and professionally

    You would also send us a list of items you want to buy, and we will make a quotation then send Paypal Invoice to you to make shopping easily.

    We weekly supply hundreds of parcels to UK, USA, Germany, Denmark, Austria, Canada, France, Spain and other coutries, enjoy good reputation of high quality and quick delivery.

     

    You would always find LED Strips, LED Controllers, LED Power Supply, LED Accessories on ledlightingsave.com

    Additional Information

    Weight 1.6000

    Product Tags

    Use spaces to separate tags. Use single quotes (') for phrases.